5-12 BA D24 en/us* 1.0 * D24_1_0_500.fm
5 Operation
5.6 Lighting/signaling system
Working lights (option)
The switch is located on the switch panel on the right.
Accident hazard due to blinded motorists!
Working lights can blind motorists. This can cause serious injury or death.
► Stop vehicle operation if motorists are blinded.
► Only take up work again if sufficient illumination of the job site can be
ensured without blinding other motorists.
Switch on the working lights in conditions of poor visibility. If illumination
still is not sufficient, use external lights. If this still does not illuminate the
job site sufficiently, stop machine operation and take it up again only when
sufficient illumination is ensured.
Function Position
Switch off the working lights
Press switch A all the
way up
Switch on the working lights D
Press switch A to the first
position
Switch on the front B and rear C working
lights
Press switch A to the
second position
To Next Page
Loading...