PT2R OPERATION 1A
1A-11
Check fuel level.
Check engine oil level.
Inspect for leaks between pump and engine.
Inspect air filter. Replace as needed.
Check and tighten external hardware.
Inspect shockmounts for damage.
Change oil in pump housing.
Change engine oil.
Check and clean spark plug.
Check air cleaner.
Clean fuel strainer.
Check and adjust valve clearance.
Clean cylinder head.
1.19 Periodic Maintenance Schedule
The chart below lists basic pump and engine maintenance. Refer to engine manufacturer's Operation Manual for
additional information on engine maintenance. A copy of the engine Operator's Manual was supplied with the machine
when it was shipped.
Daily After Every Every Every
before first two weeks month 6 months
starting 20 or or or
hours 50 hrs. 100 hrs. 500 hrs.
1.20 Changing Oil
Drain oil while engine is still warm.
1. Remove oil fill plug (e) and drain plug (f) to drain oil.
2. Install drain plug.
3. Fill engine crankcase with recommended oil up to
level of plug opening (g).
Oil capacity - 21 oz. (650 ml).
4. Install oil filler plug.
e
f
1005SD53
g