Wacker Neuson SW10 User Manual

15
FIRE-EXPLFIRE-EXPL
FIRE-EXPLFIRE-EXPL
FIRE-EXPL
OSION PREVENTION REGULAOSION PREVENTION REGULA
OSION PREVENTION REGULAOSION PREVENTION REGULA
OSION PREVENTION REGULA
TIONSTIONS
TIONSTIONS
TIONS
Flames or sparks can cause the battery and fuel to explode and therefore set fire to the
machine. To avoid and prevent the causes please follow the advice given below.
Equip the machine with an extinguisher. After any use, reload or replace it. The extinguisher must
always be in perfect working order.
- Do not short-circuit the battery clamps with keys or metal objects; any sparks could initiate
flaming of the machine’s fuel, oils and lubricants.
- Do not weld, grind, smoke or light flames near to the battery or fuel tank.
- When replacing the battery follow the indications supplied in the relative chapter.
- Always keep the machine clean and check any type of leak that may occur.
- Check efficiency and integrity of the electric plant – possible cause of starting a fire.
- Always clean the machine well after use as deposits of inflammable debris, in contact with the
hot parts of the machine, could increase the fire risk. The risks increase if this debris is in contact
with the exhaust box or near to the hot parts of the engine.
Do not use the machine in environments where dusts and gas are present, or
in a generally inflammable atmosphere or when the machine’s exhaust pipe
can come into contact with inflammable substances.
DANGER OF FIRE-EXPLOSION
GENERAL SAFETY REGULATIONS

Wacker Neuson SW10 Specifications

General

Brand	Wacker Neuson
Model	SW10
Category	Compact Loader
Language	English