3
3
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
DISPLAY
Dimensions (W x H x D) DTH-1320 : *** mm (excluding protruding portion), DTH-1620:***mm (excluding protruding portion)
Weight DTH-1320 :*** kg, DTH-1620:***kg
Operating temperature & humidity 5 to 35 degrees C, Humidity: 20% to 80% RH (non-condensing)
Storage temperature & humidity
' -10 to 60 degree C, Humidity: 20% to 90% RH (non-condensing)
(Maximum storage humidity is 38% at a temperature of 60 degree C, and maximum storage
temperature is 42 degree C at a humidity of 90%.)
Stand integlated stand
Interface Cables USB Type C
Cover plate AG etching cover glass direct bonding with LCM
Input voltage 20 VDC
Power Management VESA DPMS
Power Consumption (with AC adaptor)
*** W (Full load)
1 W or less in sleep mode (USB connected) it is CE & E-star ver.6.0 regulation.
0.5 W or less in OFF mode it is CE regulation.
USB HUB 3 USB Type C port
Display Panel a-Si Active Matrix TFT LCD (IPS)
Screen Size DTH-1320 : 13.3inch (293.76 x 165.24 mm), DTH-1620 : 15.6inch (345.6 x 194.4 mm)
Aspect ratio '16:9
Number of pixels DTH-1320 ;1920 x 1080, DTH-1620 :3840 x 2160
Input Video Connector USB Type C
Input Video Signal Display port
Output Video Connector USB Type C
Output Video Signal Display port
Supported Resolution DTH-1320 :1920 *1080, DTH-1620 :3840 * 2160
White Luminace Uniformity DTH-1320 ;65 % (min.), DTH-1620 :62.5 % (min.)
Pixel Pitch DTH-1320 :0.153 (H) x 0.153 (V) mm, DTH-1620 :0.09 (H) x 0.0- (V) mm
Viewing Angles @ CR>10 (horizontal/vertical) DTH-1320 :160(80/80) / 160(80/80) (min.), DTH-1620 :178(89/89) / 178(89/89) (min.)
Display Colors 16,777,216 colors
Contrast Ratio 800:1 (typ.)
Luminance (maximum) 360 cd/m2 (typ.) (TBD)
Response Time (Tr + Tf) 30 ms (typ.)
OSD Manual Control
OSD is controlled by DDC/CI command from PC with special APP.
(Brightness, Contrast, Color Temperature(5000K, 6500K, 9300K, USER),
Scaling(Full/Aspect), Reset)
Plug and Play DDC 2B, DDC/CI
LCD quality
Each LCD panel is produced under very stringent quality standards. Production techniques cannot
guarantee an absolutely perfect TFT display. Wacom does not allow any pixel to be always white or
always black. A small number of pixels are allowed to show a wrong color for some parts of the color
spectrum. This does not mean the display is defective.