WACOM Flex Arm User Manual

Follow all instructions and warnings for safe operation, product care, and warranty validity.

Arm mechanism under tension moves rapidly when equipment is removed. Move arm to highest position first.

Use only with specified Cintiq Pro models. Do not exceed 2 kg (4 lbs) additional load.

Place Cintiq Pro face down on a soft surface and remove the plastic cover.

Route all necessary cables through grommet holes and connect them to the Cintiq Pro.

Install the Cintiq Pro Engine onto the Cintiq Pro before routing cables.

Insert stop screw to lock portrait or landscape monitor rotation.

Remove the cable outlet cover and close the plastic cover.

Place the bracket and insert screws. Use 4 screws for Cintiq Pro 24, 6 for Cintiq Pro 32.

Ensure mounting surface is strong enough to handle product and equipment. Wood surface recommended 25mm thick.

Do not rotate Cintiq Pro past the rear desk edge to avoid instability, damage, or injury.

Cintiq Pro is large. Use additional help for safe handling to avoid damage or injury.

Adjust lift strength to ensure smooth movement and proper positioning based on load weight.

Adjust friction to control movement ease, ensuring smooth operation without slippage.

Overview of Wacom's limited warranty terms, coverage, exclusions, and service procedures.

Details of Wacom's limited warranty for products purchased in the USA, Canada, Central America, etc.

Details of Wacom's limited warranty for products purchased in Europe, Africa, Middle East regions.

Details of Wacom's limited warranty for products purchased in the Asia Pacific region.