To Next PageTo Next Page
Need help?Do you have a question about the Waeco IU252A and is the answer not in the manual?
General| Input Voltage | 230V AC |
|---|---|
| Output Voltage | 12V DC |
| Charging Current | 25A |
| Battery Capacity | Up to 300 Ah |
| Recommended Fuse | 30A |
| Battery Type | Lead-acid, Gel, AGM |
| Protection Features | Overload, Short circuit, Reverse polarity |
Safety instructions and warnings for preventing material damage or personal injury.
Symbols and notes explaining manual notation, actions, results, and references.
Final instruction to observe all safety guidelines.
Basic safety information to protect against electric shock, fire hazards, and injury.
Precautions for battery handling, device operation, and maintenance.
Safety for boat installation, environment, and stability.
Ensure device condition and use safe electrical sockets.
Keep device out of reach of children for their safety.
Chargers for vehicles/boats, suitable for lead, gel, AGM batteries.
Warnings about battery short circuits and prohibited battery types.
Explains fuse protection, temperature sensor usage, and control lamps.
Details different charger models and their charging capacities.
Description of main switch, status LEDs, and fan.
Description of power connection, remote control, sensor, and battery terminals.
Instructions for selecting a suitable installation location.
Details on clipping holders and fastening the mounting bracket.
Caution before drilling to avoid damaging vehicle parts.
Step-by-step guide for mounting the charger on a wall.
Steps to connect the charger to an exhaust system for ventilation.
Emphasizes that connection must be done by a qualified specialist.
Safety for electrical connections and proper cable laying.
Safety precautions for battery fluid, short circuits, and terminal connections.
Steps for laying, preparing, and connecting battery cables to the charger.
Refers to circuit diagrams for various wiring options.
Connecting power cable, temperature sensor, and remote control.
Instruction to retighten safety bolts on battery cables.
Using the charger for trickle charging and activating the device.
Information on starter battery output voltage and current.
Setting charging voltage/duration, consulting retailer, DIP switch safety.
Configures charging voltage for 12V/24V models and main phase duration.
Selects charging mode and operates sleep mode via remote control.
How to use the remote control to switch sleep mode on/off.
Prevents sulfation, outlines conditioning steps, and expected outcomes.
Details post-conditioning steps to protect the battery.
Details the I and U0 charging phases and their parameters.
Note on selecting U0 phase voltage and time via switch panel.
Details U phase trickle charge and multi-battery charging via diodes.
Caution on capacity limits and charging voltage adjustment by temperature.
Explains LED indicators for battery charge status (I, U0, U phases).
Caution against sharp objects; clean with a damp cloth.
Steps to troubleshoot low battery voltage rise during charging.
Troubleshooting steps if battery is not fully charged after 20 hours.
Troubleshooting steps if battery discharges quickly after use.
Information on submitting claims, required documents, and contacting manufacturer.
Instructions for disposing of packaging material in recycling bins.
Advice on contacting local centers for proper device disposal.
Warning not to dispose of batteries with household waste; return to retailer.
Lists product series standards applied to the charger.
Lists basic standards compliance, e.g., EMC.
