To Next PageTo Next Page
Need help?Do you have a question about the Waeco PerfectCharge IU152A and is the answer not in the manual?
General| Input Voltage | 230 V AC |
|---|---|
| Output Voltage | 12 V DC |
| Charging Current | 15 A |
| Battery Type | Lead-acid, Gel, AGM |
| Protection Class | IP 20 |
| Protection Features | Overvoltage, short-circuit, reverse polarity |
| Operating Temperature | -20 to +50 °C |
| Recommended Battery Capacity | 50 - 150 Ah |
Safety rules for operating electrical devices to protect against hazards.
Precautions for safe operation of the charger, preventing damage and hazards.
Explains the role of the fuse and control lamps in the device's operation.
Details specific capabilities and battery charging capacities for different models.
Identifies and describes the function of front and rear panel controls and connections.
Instructions and warnings for connecting the charger to various battery types.
Steps for connecting the device to the mains power supply.
How to connect an optional temperature sensor for optimal charging.
Instructions for connecting an optional remote control for operation.
Guide to configuring charging voltage, duration, and modes using DIP switches.
How to use the remote control to activate or deactivate the device's sleep mode.
Procedure for conditioning batteries to prevent sulphation during non-use.
Explanation of the different charging phases (I, U0, U) and their parameters.
How temperature sensors affect charging voltage adjustments.
