To Next PageTo Next Page
Need help?Do you have a question about the Waeco MSP 702 and is the answer not in the manual?
General| Output voltage | 230 V AC |
|---|---|
| Continuous power | 700 W |
| Output waveform | Modified sine wave |
| Frequency | 50 Hz |
| Input voltage | 12V DC |
| Protection | Overload, over temperature, low voltage, high voltage |
General safety instructions and manufacturer liability for usage and alterations.
General safety precautions for electrical devices, including circuit breakers and keeping away from children.
Ensuring the device is firmly installed and protected from heat sources.
Ensuring housing and cables are undamaged, good ventilation, and safe power connection.
Detailed steps for connecting the inverter to the vehicle battery, including polarity and earth connection.
Conditions under which the inverter automatically switches off due to voltage, temperature, or load.
Identifies common faults like no output voltage, input voltage issues, overheating, and overload, with remedies.
