Waeco SinePower MSP 2012 User Manual

SinePower MSP 702, MSP 704,
MSP 1012, MSP 1024, MSP 1512,
MSP 1524, MSP 2012, MSP 2024,
MSP 2512, MSP 2524
Status
Power
Level
Loa
d
Level
Input
O
n
Off
Rem
o
DE 10 Sinus Wechselrichter
Bedienungsanleitung
EN 34 Sine wave inverter
Instruction Manual
FR 56 Onduleur sinusoïdal
Notice d’emploi
ES 82 Convertidor de ondas seno
Instrucciones de uso
IT 107 Inverter sinusoidale
Istruzioni per l’uso
NL 132 Sinus ondulator
Gebruiksaanwijzing
DA 155 Sinus ensretter
Betjeningsanvisning
SV 177 Sinus växelriktare
Bruksanvisning
NO 199 Sinus vekselretter
Bruksanvisning
FI 221 Sinus -vaihtosuuntaaja
Käyttöohje
_MSP702_MSP2524.book Seite 1 Donnerstag, 28. Juli 2011 9:45 21

Waeco SinePower MSP 2012 Specifications

General

Input Voltage	12 V DC
Output Voltage	230 V AC
Frequency	50 Hz
Output Waveform	Modified Sine Wave
Continuous Power	2000 W
Peak Power	4000 W
Efficiency	90 %
Protection	Overload, Short Circuit, Over Temperature

Summary

Safety instructions

General safety

Covers essential safety guidelines for device operation and installation.

Safety when installing the device

Details crucial safety measures for the proper and secure installation of the inverter.

Operating the appliance safely

Provides guidelines for safe and correct operation of the inverter.

Scope of delivery

Intended use

Technical description

Description of the device

Details the connections, display, and control elements of the inverter.

Status indications

Explains the meaning of the 'Input Level' and 'Load Level' LEDs.

Fastening the inverter

Connecting the inverter

Notes on connecting

Connecting the inverter to the battery

Detailed steps for safely connecting the inverter to the vehicle battery.

Using the inverter

Switch on at the device

Using an external switch or remote control

Troubleshooting

No output voltage

Diagnosing and resolving issues when the inverter fails to produce output voltage.

Technical data