To Next PageTo Next Page
Need help?Do you have a question about the Waeco SinePower MSP 162 and is the answer not in the manual?
General| Output Power | 1600 W |
|---|---|
| Peak Power | 3200 W |
| Input Voltage | 12 V DC |
| Output Voltage | 230 V AC |
| Output Frequency | 50 Hz |
| Cooling | Fan cooled |
| Protection | Overload, Short circuit, Over temperature |
Explains the meaning of caution and note symbols for safety and supplementary information.
Covers general safety for electronic devices, including child safety and proper use.
Instructions for secure installation, protection from heat, and cable management.
Guidelines for safe operation, ensuring ventilation and correct connections.
Lists the sine wave inverter, four holders, and the instruction manual.
Details the 12V and 24V models and their respective item numbers.
Details the functions of various ports, LEDs, and switches on the inverter.
Advises on choosing a location and provides steps for attaching the inverter using holders.
Explains how to connect the MSP 162/164 and MSP 352/354 models to a power source.
Guides on connecting external switches using specific cables and configurations.
Instructions for switching the inverter on/off via the device or an external switch.
Explains LED indicators, low voltage, and overheating shutdown procedures.
Advises on safe methods for cleaning the device using a damp cloth.
Lists common faults, their causes, and recommended remedies for troubleshooting.
Outlines the procedure for returning a defective product for warranty service.
Advises on proper disposal of packaging and the device according to regulations.
