To Next PageTo Next Page
Need help?Do you have a question about the Waeco SinePower MSP 702 and is the answer not in the manual?
General safety precautions and responsibilities for electrical devices.
Precautions for safe installation and mounting of the inverter.
Guidelines for safe operation, ventilation, and handling of cables.
Details connections, displays, and control elements of the inverter.
Explains the meaning of the "Input Level" and "Load Level" LEDs.
Instructions for mounting the inverter in a horizontal orientation.
Instructions for mounting the inverter in a vertical orientation.
Important safety notes and general guidelines before connecting the inverter.
Step-by-step guide for connecting the inverter to the vehicle battery.
Procedure for connecting the 230 V output cable to the mains.
Instructions for connecting the 230V AC output cables safely.
Guidance on safely connecting multiple devices, including circuit breaker requirements.
How to connect an external switch for controlling the inverter.
Instructions for connecting an optional remote control to the inverter.
How to configure the inverter for energy-saving mode using DIP switches.
Instructions for changing the output frequency using the S4 DIP switch.
Specifies the voltage thresholds for high voltage shutdown and restart.
Specifies the voltage thresholds for low voltage shutdown and restart.
Details shutdown and restart temperatures for the inverter.
Lists the certifications the device has obtained, like e13.
General