Waeco PerfectPower PP1000 User Manual

PerfectPower
PP1000, PP2000
D5Wechselrichter mit
Netz-Vorrangschaltung
Einbau- und Bedienungsanleitung
GB 13 Inverter with mains priority circuit
Installation- and operating instrucions
E 21 Inversor de onda sinusoidal con
conmutador de red de prioridad
Instrucciones de montaje y de uso
F 29 Onduleur avec commutation
prioritaire du secteur
Instructions de montage et de service
I 37 Inverter con commutazione di
priorità di rete
Instruzioni per I'uso e di montaggio
NL 45 Inverter met netvoorrangsschakeling
Inbouw- en gebruikshandleiding
DK 53 Ensretter med prioritetskobling
til net
Installations- og betjeningsvejledning
S 61 Växelricktare med
nät-prioritetomkoppling
Monterings- och bruksanvising
N 69 Vekselretter med
nettprioritetskobling
Installasjons- og bruksveiledning
FIN 77 Verkkoetusijaiskytkennällä
varustettu vaihtomuunnin
Asennus ja käyttöohje
titelseite_neu_a5.fm Seite 1 Donnerstag, 29. September 2005 4:26 16

Waeco PerfectPower PP1000 Specifications

General

Output Power	1000 W
Input Voltage	12 V DC
Output Voltage	230 V AC
Peak Power	2000 W
Output Waveform	Modified Sine Wave
Efficiency	90%
Standby Current Consumption	0.5 A
Frequency	50 Hz
Protection	Overload, Short Circuit, Over Temperature

Summary

General Safety and Installation Instructions

Applications

Installations

General Installation Instructions

Guidelines for installing the inverter in a dry, clean, and well-ventilated location.

What is a Priority Circuit?

Electrical Connection

Connection to the Battery

Instructions for connecting the inverter to the vehicle or boat battery terminals.

Connection to the 230 V Outside Connection

Details on connecting the 230V input voltage from an external source.

Remote Control

Connection of the Remote Control

How to connect the optional remote control unit to the inverter for operation.

On-/Off-Switch

Description of the physical on/off switch and its interaction with remote control.

Putting into Operation

Without Remote Control

Steps for starting the inverter using the built-in switch.

With Remote Control

Steps for starting the inverter using the remote control unit.

Error Detection and Troubleshooting

Troubleshooting Specific Errors

Guidance on identifying and resolving common inverter errors like undervoltage or overload.

Technical Data

Scope of Delivery

Disposal Instructions