Do you have a question about the Waeco PerfectView MC402 and is the answer not in the manual?
Resolution | 480 x 272 pixels |
---|---|
Power Supply | 12/24V DC |
Camera Resolution | 640 x 480 pixels |
Video Standard | PAL/NTSC |
Aspect Ratio | 16:9 |
Touchscreen | No |
USB Port | No |
SD Card Slot | No |
Built-in Speaker | Yes |
Headphone Jack | No |
Camera Type | Rearview camera |
Operating Voltage | 12V |
Image Sensor | 1/4'' CMOS |
Viewing Angle | 120 degrees |
Operating Temperature | -20°C to +70°C |
Emphasizes observing safety instructions and stipulations from vehicle manufacturers and workshops.
Highlights hazards from inadequate cable connections like fires, airbag triggers, and damaged electronics.
Stresses securing installed parts to prevent them from becoming loose and causing injury.
Covers warnings on driving distractions, monitor usage, volume, environmental protection, and laser safety.
Warns against driver distraction and advises observing country-specific laws and regulations.
Provides essential guidelines for connecting the device to the vehicle's 12V negative earth electrical system.
Covers drilling precautions, cable laying, and overall installation steps.
Explains how to select the desired audio or video source using the remote control or display.
Provides instructions on how to insert discs into the device and how to eject them safely.
Guides on inserting and removing memory cards and USB flash drives, including compatibility notes.
Guides on connecting external audio/video devices via the 3.5 mm stereo jack.
Covers selecting media source, starting, pausing, and stopping playback.
Covers selecting radio as source, stations, searching, saving, and changing frequency bands.
Details the process of establishing a Bluetooth connection between a device and the moniceiver.
Provides instructions for dialling, displaying phone books, call lists, and using redial.
Explains how the device automatically switches to Bluetooth for incoming calls and how to accept or hang up.
Details how to select Bluetooth devices for audio/video playback and how music is transmitted.
Covers opening settings, enabling/disabling Bluetooth, and automatic connection.
Details how to adjust EQ modes, parameters like bass/mid/treble, and fader/balance.
Instructs how to open the main settings menu via the SOURCE menu.
Covers settings like language, radio area, beep, key color, calibration, and wallpaper.
Details how to set the date, time mode, time, desk timer, time zone, and power off timer.
Covers settings for subwoofer crossover, loudness (LOUD), and reverse mute function.
Details settings for the backview mirror, brightness, and parking function for video display.
Addresses issues with the vehicle not being switched on, incorrect cable connections, or a faulty fuse.