WAFER GSM-HOUSE User Manual

WAFER GSM-HOUSE INTERCOM UNIT
http://www.waferstar.com
GSM-HOUSE MANUAL
New version published from 2016
SHANGHAI WAFER MICROELECTRONICS CO.,LTD

WAFER GSM-HOUSE Specifications

General

Brand	WAFER
Model	GSM-HOUSE
Category	Intercom System
Language	English

Summary

GSM-HOUSE OPERATING INSTRUCTIONS

PRODUCT DESCRIPTION

Overview of the WAFER GSM-HOUSE intercom, detailing its anti-vandal design and GSM-KEY function for gate access.

CONNECTOR DESCRIPTION

Details the various connectors on the GSM-HOUSE unit, including power, inputs, and relay terminals.

ADVANTAGES OF WAFER GSM-HOUSE

INSTALLATION

WAFER GSM-HOUSE PROGRAMMING

OPERATION mode:

Visitor mode:

Details the process when a visitor presses the call button, initiating a voice call to the owner.

Controlling the relay output

Explains how to control the door release relay via intercom call, free call, or SMS commands.

Adjust the sound volume

Instructs on how to adjust the audio volume during an intercom call using specific buttons.

Teach button (Device reset button)

Covers the functions of the teach button for programming authorized numbers and resetting the device.

SMS COMMAND LIST:

#ALARM setup

#MODE Relay Operation Mode SETUP

#STATUS Check the config information of the terminal

#OUT Control the Relay Output on or off

Customized output control command TEXT:

#Battery working and alarm command

#GSM Intercom function and config command

1. Add the phone number for the inter calling

Instructions for adding primary and secondary phone numbers for intercom calls and checking stored numbers.

2. Customize the keypad button for release the out1 and out2

Guides on customizing keypad buttons to trigger relay outputs (OUT1, OUT2) for gate control.

3. Inter calling audio volume adjust

Explains how to adjust the audio volume during an intercom call using the '*' and '#' keys.