User’s Manual—Read before using this equipment
6
©2015 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
HEIGHT ADJUSTMENT KNOB
1. Locate the height adjustment knob underneath the base of the equipment.
2. Turn the knob slowly in clockwise direction. Make sure the steel cable is
set in the groove of wheel.
Turning the knob CLOCKWISE
increases the step height. If the height
adjustment knob is tightened as far
as possible, the pedals will provide
the largest stepping range available.
Turning the knob COUNTER-
CLOCKWISE to decrease the step
height. If the height adjustment knob is
loosened so that it is barely screwed
in, the pedals will provide the smallest
stepping range for your workout.
3. One of the pedals will be automatically lifted up as the height
adjustment knob is tightened. Hint: Lift up one of the stepper pedals
manually before tightening the height adjustment knob.
4. Once the height adjustment knob has been properly adjusted, test out
the stepper by stepping on each pedal in an alternating fashion.
5. Adjust the height adjustment knob according to how high you would
prefer the steps to be.
To Next Page
Loading...
