EasyManua.ls Logo

Wagan LED Lantern - Specific Safety Rules; Electric Specifications; Description of Functions; Operation

Wagan LED Lantern
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.wagan.com
© 2009 Wagan Corporation
All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
2 Million Brite-Nite LED Lantern by Wagan Tech
3
User’s ManualRead before using this equipment
4
2. SPECIFIC SAFETY RULES
Be sure to charge the unit completely before its first use. This will prolong the life of
the Brite-Nite Spotlight Lantern.
Do not turn on the unit in any way while charging. Doing so may damage the
unit and is not covered under warranty. As with all lead-acid cell batteries, when
storing, be sure to recharge the battery fully every 3-6 months to prolong the life of
the battery.
Though durable and built to last, do not drop the unit excessively as this will greatly
reduce the life of the spotlight.
Do not submerge the unit under water.
Lens becomes very hot during operation. Do not touch lens while lens is still hot.
Do not cover lens during operation.
Do not shine directly into eyes.
Turn off the unit and allow it to cool before storage or maintenance.
When servicing always wear safety glasses when working with hardware.
Use only supplied chargers.
3. DESCRIPTION OF FUNCTIONS
Features
Bright 2 million power-rated beam
24 LED lantern
Built-in 6V 4AH sealed lead-acid rechargeable battery
Charge in vehicle (DC adapter) or at home (AC adapter)—both included
Great for outdoor and emergency use
Compass and carrying strap for general navigation and ease of use
ELECTRIC SPECIFICATIONS
Operating Voltage 6V *
INPUT: 120V ~ 60Hz 6W
OUTPUT: 9V 300mA
AC Charger MODEL: WJ-Y350900300D
INPUT: 120V ~ 60Hz 6W
OUTPUT: 9V 300mA
DC Charger 12V
Rechargeable Battery Sealed lead acid battery 6V DC, 4 AH
BRAND: XINSHUN
MODEL: LT640
6V 4Ah
Battery included
Halogen Bulb Quartz Halogen Bulb 6 Volt 8W/20W H3
LED 24 units of white 15,000 MCD
Dimensions 11” x 7.3” x 7”
Net Weight 3 lbs
* Direct Current symbol
4. OPERATION
Spotlight High Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from “O” to “|” position.
Spotlight Low Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from “O” to “II” position.
LED lantern: Locate the switch at the base of the lamp next to the charging input
jack. Slide switch to turn on.
Important
Do not turn on lamp in any way while charging. Doing so may damage the unit and is
not covered under warranty. As with all lead-acid cell batteries, when storing, be sure to
recharge the battery fully every 3-6 months to prolong the life of the battery.

Related product manuals