EasyManua.ls Logo

WAGNER 309 - General Instructions

WAGNER 309
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL INSTRUCTIONS
Your model is an all solid-state SSB/AM transceiver for 27MHz Citizens' Band
use. It uses a frequency synthesized circuit to provide Phase Locked Loop
controlled transmit and receive operation on all 40 channels. You can use
your transceiver on any one of the 40 channels in the conventional AM mode,
plus the same 40 channels in either the Upper Single Sideband or Lower Single
Sideband mode. The flexibility of SSB mode not only doubles the effective
number of channels from 40 to 80, but also increases the effective range of
communication because all the power is concentrated in one sideband to provide
100 percent talk-power. Single Sideband reception also adds advantages in
sensitivity and selectivity, plus lower signal-to-noise. This of course also
contributes to increase in operating range.
Your model is carefully designed for ease of operation. You can select the
SSB mode of the Upper Sideband or Lower Sideband, and/or AM with simple switch
of the button. Transmission is simple, too - just press the microphone button.
Ordinarily SSB signals reach farther and are heard more clearly than equivalent
AM signals. SSB reception on the selected sideband is simple, too - you just
adjust the Clarifier control for fine tuning of the received voice.
We add all the other wanted features for optimum communication - RF Gain
Control, Squelch Control, Noise Blanker, full-time Automatic Noise Limiter to
combat ignition noise and S-RF-PA level meter.
This transceiver is designed to operate from a normal 12 volt DC supply (positive
or negative ground system).