EasyManua.ls Logo

WAGNER FELIX - Operating Instructions; Technical Data; Assembly and Initial Setup

WAGNER FELIX
30 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
FELIX
4
Operating Instructions
Congratulations on the purchase of your WAGNER lamp FELIX.
Read the operating instructions carefully before putting the device into operation and
observe the safety instructions. Keep the operating instructions in a safe place.
Note! Your FELIX is weather-resisting and should be operated with direct
exposure to solar radiation. Erect your FELIX so that it receives
maximum exposure to the solar radiation to increase its capacity.
FELIX is equipped with a NiCd-rechargeable battery. This
rechargeable battery is not loaded upon delivery. After the device has been
put into operation, the rechargeable battery requires ca. 3 days of sun to
attain its full capacity. Briefer, weaker emission of light is normal during this
period of time and is not a defect. For this first charging, the main switch
must be set to „OFF“.
ASSEMBLY (fig. 2)
Switch the main switch to "ON".
Technical data
Solar field Mono-crystalline
Size ca. 1800 mm²
Capacity at full exposure to solar radiation ca. 0,20 W
Rechargeable battery NiCd
Voltage 1,2 V
Loading capacity 600 mAh
Luminous element LED’s
Duration of emission of light max. 8 h

Related product manuals