WAGNER POWER STEAMER 915e User Manual (English)

Other manuals for WAGNER POWER STEAMER 915e

Questions and Answers:

J
jhicksJul 28, 2025
Why WAGNER POWER STEAMER 915e Kitchen Appliances unit fails to heat up but red power light is on?
- J
  Juan AllenJul 28, 2025
  If your WAGNER Kitchen Appliance unit fails to heat up and the red power light does illuminate when the ON/OFF switch is on, it could be due to a few reasons. The water tank might be empty. Also, there could be mineral build-up in the unit. In that case you should refer to the Mineral Build-up section on page 11 for cleaning procedure. Finally, the unit might be damaged or in need of repair, in which case you should discontinue use and call Customer Service.
S
Samantha HullAug 3, 2025
How to fix WAGNER Kitchen Appliances when it fails to heat up and the power light is off?
- T
  Tanner HenryAug 3, 2025
  If your WAGNER Kitchen Appliance is not heating up and the red power light is not on when you turn the ON/OFF switch to ON, there are a few potential causes. First, check that the unit is properly plugged into the wall outlet. Second, there may be a loose electrical connection, in which case you should discontinue use and call Customer Service. Lastly, the unit might be damaged or in need of repair, so you should also discontinue use and contact Customer Service.
D
Daniel CampbellAug 8, 2025
What to do if the steam output is weak or intermittent in WAGNER POWER STEAMER 915e Kitchen Appliances?
- D
  David AdamsAug 9, 2025
  If the steam output from your WAGNER Kitchen Appliance is weak or intermittent, it could be due to a few reasons. The water level in the tank might be running low. Another reason could be that the steam hose may be kinked internally; try removing any kinks from the steam hose, and rotating the steam gun around may help. Also, there could be mineral build-up in the unit.
E
eparkAug 15, 2025
What to do if there is excessive amounts of water in steam from WAGNER POWER STEAMER 915e?
- G
  Gregg MurphyAug 16, 2025
  If your WAGNER Kitchen Appliance produces excessive water in the steam, it might be due to a few reasons. First, there could be water condensation in the steam hose; try pointing the nozzle towards the sink and shaking it while pressing the steam trigger. Second, the water tank might be overfilled; filling it with more than 40 oz/1200 ml can interfere with steam production, so turn the unit off, let it cool, and drain some water. Lastly, the unit may not have reached its full operating temperature; wait until the orange steam pressure indication light has turned off.
J
Jennifer PerkinsAug 21, 2025
Why floor surfaces appear to have streaks after cleaning with WAGNER POWER STEAMER 915e?
- J
  Jason BlakeAug 21, 2025
  If the floor surfaces appear to have streaks after cleaning with your WAGNER Kitchen Appliance, it could be due to a couple of reasons. The cleaning pad might be dirty, so try replacing it with a clean one. Alternatively, there might be hard water residue on the floor, so consider switching to distilled or de-mineralized water.