WAGNER SteamForce Pro - 1 Year Guarantee; EU Declaration of Conformity

EN
14
SteamForce Pro
1 year guarantee
The guarantee runs for one year, counting from the date of sale (sales slip). It covers
and is restricted to free-of-charge rectication of faults which are demonstrably
attributable to the use of faulty materials in manufacture, or assembly errors; or free-
of-charge replacement of the defective parts. The guarantee does not cover incorrect
use or commissioning or tting or repair work which is not stated in our operating
instructions. Wearing parts are also excluded from the guarantee. We expressly reserve
the right to full the guarantee. The guarantee expires if the tool is opened up by
persons other than manufacturer service personnel. Transport damage, maintenance
work and loss and damage due to faulty maintenance work are not covered by the
guarantee. Under any guarantee claim, there must be proof of purchase of the tool
through submission of the original receipt. Wherever legally possible, we exclude all
liability for injury, damage or consequential loss, especially if the tool has been used
for a purpose other than that stated in the operating instructions, commissioned or
repaired other than in accordance with our operating instructions or if repairs are
performed by someone who is unqualied. We reserve the right to perform any repairs
in excess of those stated in our operating instructions. In case of guarantee or repair,
please refer to your point of sale. This guarantee does not aect your statutory rights.
EU Declaration of conformity
We declare under sole responsibility that this product conforms to the following
relevant stipulations:
2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU
Applied harmonised norms:
EN 60335-1, EN 60335-2-54, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 62233
The EU declaration of conformity is enclosed with the product.
If required, it can be re-ordered using order number 2400204.