14
W 180 P
GB
d) Store unused power tools so that they are inaccessible to children. Do not let
persons use the tool who are not familiar with it or who have not read these
instructions. Power tools are dangerous when they are used by inexperienced persons.
e)
Take proper care of your tools. Check whether the moving parts function
trouble-free and do not jam, whether parts are broken or damaged so that
the tool function is impaired. Have damaged parts repaired before using the
tool. Many accidents have their origin in power tools that have been maintained badly.
f)
Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specied for this special tool type. Take the working
conditions and the activity to be carried out into consideration. The use of power
tools for purposes other than the intended ones can lead to dangerous situations.
g)
Keep the handles and grip surfaces dry, clean and free of oil and grease. Slippery
handles and grip surfaces hamper safe operation and control of the electric tool in
unforeseen situations.
5. Service
a) Have your tool repaired only by qualied specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s
service agent or a similarly qualied person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
•
Do not use the spray guns to spray ammable substances.
•
The spray guns are not to be cleaned with ammable solvents.
•
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for eective natural or articial
ventilation.
•
No sources of ignition are to be in the immediate area when spraying, e.g. open ame,
cigarettes, sparks, glowing wires and hot surfaces.
•
Before carrying out any work on the spray gun, unplug the lead from the power socket.
•
Take precautionary measures against potential hazards from the spray liquid and follow
any instructions given on containers or laid down by the manufacturer of the liquid.
•
Do not spray any liquid of unknown hazard potential.
•
Wear a breathing mask and ear protection.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
To Next Page
Loading...
Need help?
General
