Need help?Do you have a question about the WAGNER w 550 and is the answer not in the manual?
General| Container Capacity | 1.5 l |
|---|---|
| Technology | Airless |
| Paint tank volume | 1.5 l |
| Max. Flow Rate | 550 ml/min |
| Paint flow rate | 550 ml/min |
| Max Material Throughput | 550 ml/min |
| Nozzle Size | 0.015 inch |
Guidelines for maintaining a safe and tidy work environment, avoiding hazardous areas.
Precautions regarding the tool's electrical connections, plugs, and protection from moisture.
Advice on personal attentiveness, wearing protective gear, and safe operation practices.
Instructions for proper operation, avoiding overload, and maintaining tool condition.
Requirements for tool repair and maintenance by qualified specialist personnel.
Steps for measuring the viscosity of coating materials using a test cup and timing.
Guidance on positioning the suction tube for different spraying orientations.
Overview of available spray jet settings (flat, circular) for various applications.
Process for adjusting the air cap to the desired spray-setting position.
How to set the material volume using the regulator on the trigger guard.
Best practices for achieving an even spray result and surface quality.
Recommended actions for short work interruptions, including turning off the machine.
Troubleshooting steps when the nozzle does not dispense material.
Solutions for issues causing material to drip from the nozzle.
Addressing problems related to coarse atomization of the sprayed material.
Identifying causes and remedies for an irregular spray jet.
Troubleshooting "paint tears" caused by coating material application.
Managing and reducing excessive overspray or fogging.
To Next Page
