slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
Technical Data
Max. viscosity: 130 DIN-s
Power source: 110 V ~/ 60 Hz
Power consumption: 335 W
Atomizing output: 95 W
Double insulation:
Sound pressure level: 80 dB (A)
Oscillation level: < 2,5 m/s²
Air hose length: 1,8 m
Gewicht: 3,3 kg
Description (Fig. 1)
1 Air cup 9 Air hose
2 Nozzle 10 Carrying belt
3 Union nut 11 Air lter
4 Gun body standard spray attachment 12 Air screen
5 Trigger guard 13 Mains lead
6 Material volume regulation 14 Spray gun holder
7 Handle 15 Container
8 ON/OFF switch 16 Ventilating hose
17 Valve
Coating Materials Suitable for Use
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Wall paints (emulsion paints) etc., alkali and acidic paints.
Coating materials with a ash point below 21 °C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
Stir the material up and put the required amount into the paint container.1.
Thinning recommendation
Sprayed material
Glazes undiluted
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents undiluted
To Next Page
Loading...
