Problem Cause Remedy
Coating material
causes "paint tears"
Viscosity of coating material
•
too low
Too much coating material
•
applied
Check viscosity ➞
Turn material volume ➞
adjusting screw to the
left (-)
Too much fog of
coating material
(Overspray)
Distance to the object too
•
large
Too much coating material
•
applied
Reduce distance ➞
Turn material volume ➞
adjusting screw to the left
(-)
Paint in the
ventilating hose
Diaphragm soiled
•
Diaphragm defective
•
Clean the diaphragm ➞
Replace the diaphragm ➞
Device does not
function
Device overheated
•
Unplug the power plug, ➞
let the device cool down
approx. 30 minutes, do not
bend the hose, check the
air lter, do not cover the
intake slots
1 year guarantee
The guarantee runs for one year, counting from the date of sale (sales slip). It covers and
is restricted to free-of-charge rectication of faults which are demonstrably attributable
to the use of faulty materials in manufacture, or assembly errors; or free-of-charge
replacement of the defective parts. The guarantee does not cover incorrect use or
commissioning or tting or repair work which is not stated in our operating instructions.
Wearing parts are also excluded from the guarantee. The guarantee excludes commercial
use. We expressly reserve the right to full the guarantee. The guarantee expires if
the tool is opened up by persons other than WAGNER service personnel. Transport
damage, maintenance work and loss and damage due to faulty maintenance work
are not covered by the guarantee. Under any guarantee claim, there must be proof
of purchase of the tool through submission of the original receipt. Wherever legally
possible, we exclude all liability for injury, damage or consequential loss, especially if the
tool has been used for a purpose other than that stated in the operating instructions,
commissioned or repaired other than in accordance with our operating instructions or if
repairs are performed by someone who is unqualied. We reserve the right to perform
any repairs in excess of those stated in our operating instructions. In case of guarantee
or repair, please refer to your point of sale.
SAC
/ (11) 3758 3140
0800 774 0112
email: sac@verixx.com.br