Need help?Do you have a question about the Wahl ZX805 and is the answer not in the manual?
Appliance can be used by children aged 8+ and persons with reduced capabilities under supervision.
Keep hands, hair, clothing, and utensils away from moving parts during operation.
Switch off and unplug before attaching/removing parts or cleaning.
Never use the appliance without paying attention; always unplug when not in use or unattended.
Do not operate with a broken cord/plug or if the appliance malfunctions or is damaged.
Any servicing or repair must be performed by an authorized service representative.
Do not use outdoors or in damp areas; keep cord away from hot surfaces.
Only use manufacturer-supplied attachments to avoid fire, shock, or injury.
Never immerse the unit in water or use with wet hands; unplug immediately if wet.
Use only for intended purpose, handle blades with care, and use with lid tightly closed.
Always cool hot liquids before blending and avoid contact with steam or liquids.
Clean jug, cup, and lid before first use. Clean main unit with a damp cloth.
Assemble appliance and ensure it is turned off before plugging in.
Check mains voltage, ensure jug is fitted, set dial to '0' before use.
Use dial for speed settings (0-2) or pulse function (P) for desired blending consistency.
Do not operate continuously for over 1 minute; allow appliance to cool down.
Remove cap for warm liquids, start slow, avoid over 1L level, take care with steam.
Ensure unit is unplugged before installing the grinder attachment.
Fill grinder halfway, screw housing tightly; motor won't work if not secured.
Unplug unit, unscrew housing, clean with hot water and mild agent, handle blades carefully.
Clean main body with damp cloth. Jug can be cleaned by running with soapy water.
Remove jug, turn upside down, twist housing to remove and clean carefully.
Register your product online at www.wahl.co.uk for updates and offers.
Guaranteed against defects for 24 months; invalid if misused or repaired by unauthorized persons.
Damaged supply cords must be replaced by a qualified service agent.
Connect BLUE wire to 'N' terminal, BROWN wire to 'L' terminal. Avoid Earth terminal.
To Next Page
General