Wahoo ELEMNT BOLT User Manual

TROUBLESHOOTING STEPS
If your ELEMENT/BOLT is stuck, frozen, or otherwise unresponsive:
Try a forced reboot and/or factory reset as described below.
 Forced reboot: Hold down the power button for 10 seconds to perform a forced reboot. e.g. Generally used
if the screen becomes non-responsive.
 Factory reset: accessible from the Settings page, then System Info this option restores all settings to
factory defaults.
Warning: a factory reset will delete all workouts stored on the device
If this doesn't solve the issue, try charging the ELEMNT/BOLT using a wall outlet for 1 hour or more. Avoid using
Apple brand USB blocks as some do not provide a full charge. After 1 hour, press and hold the power button for 10
seconds.
If your ELEMENT/BOLT reboots continuously in a loop:
The 3 most common causes of this issue are battery-related update failures, a corrupt ride file, or a stuck power
switch. Solutions are provided below:

Wahoo ELEMNT BOLT Specifications

General

Display Size	2.2 inches
Battery Life	Up to 15 hours
Water Rating	IPX7
GPS	Yes
Compatibility	iOS, Android
Mount Type	Integrated out-front mount
Storage	16 GB
LED Indicators	Yes
Connectivity	ANT+, Bluetooth, Wi-Fi
Sensors	Barometric Altimeter
Buttons	3
Weight	68 grams

Summary

Troubleshooting Unresponsive Device

Forced Reboot Procedure

Hold the power button for 10 seconds for a forced reboot when the screen is unresponsive.

Factory Reset Option

Restore settings to factory defaults via Settings > System Info; deletes stored workouts.

Charging and Reboot

Charge using a wall outlet for 1 hour, then press and hold the power button for 10 seconds.

Troubleshooting Continuous Reboots

Battery Update Failure Cause

Updates can cause reboot loops on low battery; charge for 1 hour and hold power button.

Stuck Power Switch Fix

If reboots persist, the power switch may be stuck; try pressing it at an angle to free it.