Command format: PARAM#
e.g.: PARAM#
Reply information:
IMEI: 35341903XXXXXXX // IMEI number of the device//
GPRS Interval:10;//GPS data uploading Interval, the time ranges from
10-18000s, default as 10s //
TIMESET:20; //the GPS working time when ACC is OFF,the time range from
1-999mins(default as 20 min)//
SOS Number: 1. 135xxxxxxxx
2. 136xxxxxxxx
3. 137xxxxxxxx//maximum three SOS numbers used for
alarm//
Center Number: 15942703401//only one center number used for
cutting off and restoring oil command//
Sensor time interval:10,180; //sensor detecting time, default as 10s; vibratio
alarm delay,default as 180s; the time ranges from10-300s//
Sensor alarm time interval:10; //sensor alarm time interval, the time ranges
from 1-60mins; default as 10mins//
TimeZone:E,8,0; //set time zone; default as E8//
It contains IMEI number/ GPRS Interval/TIMESET/SOS/CENTER
number/Sensor time interval/Sensor alarm time Ineterval/TimeZone
Note: Only SOS number can send SMS command to set and delete center
number.
eg:GPRSSET#
reply message:
GPRS:ON//GPRS on/off status//
APN:CMNET,0,0.0.0.0,,;//APN setting information//
Server:1,egt06.szdatasource.com,8841,0;//platform information//
URL:http://maps.google.com/maps?q=; //preset web link setting information //
upload positioning data to the platform server every 10s. Users can modify
TIMER,time(second)#GPRS time sending
interval by SMS “TIMER,time(second)#TIMER,time(second)#”.