To Next PageTo Next Page
Need help?Do you have a question about the Walgreens IR1DA1 and is the answer not in the manual?
General| Response Time | 1 second |
|---|---|
| Power Source | 2 AAA batteries |
| Display | LCD |
| Auto Power Off | Yes |
| Fever Alert | Yes |
| Type | Infrared |
| Measurement Range | 32.0°C to 42.9°C (89.6°F to 109.2°F) |
| Accuracy | ±0.4°F (±0.2°C) |
| Measurement Distance | 1-5 cm |
Innovative technology allows ear temperature measurement in only 1 second.
Unique patented probe assembly and advanced sensor ensure accurate readings.
Ergonomic design provides simple use; suitable for children and sleeping subjects.
Displays the last reading automatically for 2 seconds when the unit is switched on.
No risk of glass or mercury; safe for children; hygienic with probe covers.
Disposable cover for the measuring probe to ensure hygiene.
The part of the thermometer that is inserted into the ear canal.
Button to initiate measurement and switch between Celsius/Fahrenheit.
Shows temperature readings, status, and error messages.
Powers the thermometer on and off.
Covers the battery compartment.
Protects the thermometer and aids in probe cover application.
Tips for obtaining precise readings, including using probe covers and proper ear canal positioning.
Indicates the unit is performing a self-check upon startup.
Shows the previously recorded temperature reading for 3 seconds.
Shows the unit is ready for measurement with a beep and flashing unit.
Indicates measurement is finished with a beep and non-flashing unit.
Alerts the user to replace the battery for accurate measurements.
Place probe cover onto storage case hole, aligning paper side up.
Vertically penetrate the probe into the center part of the probe cover.
Completely push the probe into the cover holder hole firmly.
After a slight click, take out the probe; the cover should be attached.
Fit a new, undamaged probe cover prior to every measurement for accuracy.
Press the ON/OFF button; the display shows all symbols for 2 seconds.
The last measurement reading appears automatically for 3 seconds.
A beep indicates the unit is ready; the °C or °F symbol will flash.
Straighten ear canal by pulling outer ear up and back for clear eardrum view.
Insert probe into ear canal, press START, release upon beep for measurement.
Remove the thermometer from the ear; the display shows the measured temperature.
