RAZOR WALKIE TALKIE
USER MANUAL
Included
• Razor Clip-On Radio unit
• 3 AAA Batteries
• Instruction Manual
Boom Mic
Power/Menu
Antenna
Volume/Scroll
Push-to-Talk
Display
Clip Release
Windscreen
Razor Audio
Jack Connector
Battery
Compartment
Top Clip
Bottom Clip
Volume
Mode/Activation
Indicators
Channel/
Menu Selection
Sub-Channel
Menu Mode Indicator
Menu Mode Indicator
Battery Level
Getting Started
Battery Installation
1. Remove the top clip by sliding the clip release over.
2. Remove battery door by pressing the tab in at the bottom
3. Insert 3 AAA batteries into the compartment
4. Replace the battery door and reattach the top clip
Attaching the Razor Walkie Talkie to a Razor Slim Muff
1. Remove the top clip by sliding clip release to the right.
2. Position the Razor Walkie Talkie along the left side of the Razor Slim muff with the audio jack
directly lined up with the audio jack on the muff.
3. Slide the Razor Walkie Talkie up until the audio jack is fully inserted
4. Reattach the top clip ensuring that the clip holds the top of the Razor earcup and the wire
protruding from the earcup is positioned between the clip hooks.
To Next Page
Need help?
General