38
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 07-01-06
74 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7803)
Spring and Pivot Mount Components
1 5744-1 Spring Clip Bracket 1
2 5975-3 Cable Tie (50# x 7") 4
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 2, F117 & 166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 7803-1 74 SD Carrier Frame 1
(Includes Item # 15)
12 5850-5 Handle Grip (1 x 1 x 3-3/4) 1
13 8811-25 Tilt Bar with Grip (35") 1
(Includes Item # 12)
14 7775-5 Lock Pin (5/16) 1
15 5748-10 Rubber Mat (1-1/2 x 6) 2
16 8674-10 Lever, Deck Lock, RH 1
17 8740 Deck Pin Bushing (3/4 ID) 4
18 5830 Grease Fitting 6
Caster Wheel Components
19 8766 Axle Nut (3/4-16) 2
20 8768-2 Seal, Reverse Lip 4
21 8037 Bearing Cone (3/4 ID) 4
22 8037-2 Bearing Race 4
23 8768 Caster Wheel, Pneumatic (11 x 4.00-5) 2
(Includes Items # 5 & 21)
8768-3 Tire, Pneumatic (11 x 4.00-5)
*
8768-5 Caster Wheel (5 x 3) *
24 8767 Axle, Caster Wheel (5-1/8) 2
25 8765-10 Caster Wheel Fork 2
26 8769-7 Seal 2
27 8769-6 Bearing Cone (1" ID) 4
28 8769-5 Bearing Cup 4
29 8769-8 Dust Cap 2
Fasteners
F014 3/8-16 ESNA Nut 2
F117 Retainer Ring 2
F140 7/16-14 x 1 Hex Bolt 4
F166 Retainer Ring 2
F218 7/16 Split Lock Washer 4
F263 1-1/4 External Snap Ring 4
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
F344 3/4-16 Slotted Hex Nut 2
F347 3/4 SAE Washer 2
F348 1/8 x 1-1/2 Cotter Pin 2
* Service Part Only
NOTE: The E-Z Pin Puller P/N 8770 can be ordered to assist
removing and installing height adjustment hitch pins on
larger decks. This item stows on tractor when not in use.
To Next Page
Loading...
