Need help?Do you have a question about the Walkera SCOUT-X4 and is the answer not in the manual?
Instructions for assembling the skid landing and performing radio code binding.
Steps for assembling skid landing and performing code binding without skid landing.
Initiate compass calibration by moving both sticks down and to the middle.
Rotate the aircraft forward smoothly in 90-degree increments.
Rotate the aircraft clockwise around the roll axis in 90-degree increments.
Rotate the aircraft horizontally around the yaw axis in 90-degree increments.
Rotate the aircraft nose down smoothly in 90-degree increments.
Place aircraft upright; RED blinking stops, indicating calibration is finished.
Prepare the gimbal, slide it onto the mount rail, and secure it with the springloaded screw.
Connect the 9-pin white data cable to the aircraft and the gimbal.
Detailed steps for installing the iLook+ camera and connecting its components.
Procedure to unlock the aircraft motors using the radio controller sticks and switches.
Procedure to lock the aircraft motors using the radio controller sticks and switches.
Overview of DEVO F12E radio control functions and their modes.
Instructions for setting up the AUTO Take Off function using the DEVO F12E radio.
Instructions for configuring and using the GPS Hold mode on the DEVO F12E.
Instructions for setting up and activating the Round Fly mode on the DEVO F12E.
Instructions for setting up and engaging the Return To Home feature.
Explanation of Intelligent Orientation Control mode and its operational requirements.
Instructions for extending and retracting the landing gear automatically.
Overview of the DEVO F12E radio's main interface and screen elements.
Procedure for selecting the appropriate model profile on the DEVO F12E transmitter.
Procedure for selecting the aircraft type (e.g., Airplane) on the DEVO F12E transmitter.
Setting the wing type configuration on the DEVO F12E transmitter.
Configuring device outputs for various functions like Gear, Flap, AUX, etc.
Configuring sensor settings, including voltage, GPS receive, and time zone.
Adjusting reverse switch settings for various control functions on the transmitter.
Adjusting servo travel limits for channels like Elevator, Throttle, and AUX.
Monitoring real-time sensor data such as battery voltage, altitude, and speed.
Configuring video settings for the camera, including status, channel, and background.
Setting up the timer function on the DEVO F12E transmitter for stopwatch or countdown.
Guide to connecting various components to the FCS-X4 main controller ports.
Guide to connecting components to the DEVO RX707/RX709 receiver ports.
Instructions for adjusting the PIT and ROLL knobs on the G-3D gimbal.
Specifications for the iLook+ camera, including video resolution and storage.
Details on the 5.8G wireless image transmission capabilities of the camera.
Guidance on selecting the best frequency channel for the iLook+ camera.
Instructions for operating video recording via the radio transmitter.
Instructions for operating video recording directly on the camera.
Instructions for taking photos using the camera's shutter button.
To Next Page
General
