Walkera Master cp - User Manual

Specifications:
Main Rotor Dia. : 462mm Standard transmitter: DEVO-7E Tail Motor: 1627F
Tail Rotor Dia. : 113mm
Optional transmitter: DEVO-6/7/8S/10/12S Main Motor: 380PF
Overall Length: 440mm Receiver: RX2637H-D Recommend Environment: Indoor and Outdoor
A
ll-up Weight: 420g (Battery included) Gyro: 6-Axis Recommend Experience Level: Intermediate Level
Battery: 11.1V 1000mAh Li-Po
Brush ESC: Master CP ESC Product type: 200 size Collective Pitch Enter level helicopter
Servo: WK-7.6-6 / weight 8.5g / speed 0.09sec/60°(4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5×11.8×24mm
Features:
1) Latest 6-Axis stability enhance Control system ensures stable and precise flight , it is easy to control for both basic
flight and 3D flight, 100% decrease the difficulty of the operation.
2) High performance Brushed motor not only reduce the cost,but also ensures enough powerful to do 3D as the brushless motor.
3) Adopts 2.4 GHz technology and supports both fixed and automatic ID binding and ID assignment.
4) The RX firmware can Update Online (required UP02 upgrade cable and adapter ).
5) Telemetry function can be accomplished after update the RX firmware. The Telemetry helps you get a real time data
feedback about the Battery Voltage and the Motor Temperature .(A telemetry function Radio is a must)

Summary

Master CP Safety and Precautions

General Helicopter Safety Guidelines

Essential safety precautions for operating and maintaining the RC helicopter to prevent accidents.

Pre-Flight Checks and Procedures

Crucial checks and procedures to perform before commencing flight operations for safety.

Transmitter Setup for Master CP

DEVO-7 E Standard Transmitter Configuration

Step-by-step guide for setting up the standard DEVO-7E transmitter.

Optional DEVO Transmitter Configuration

Configuration details for optional DEVO transmitters (DEVO-6/7/8S/10/12S).

RX2637 H-D Receiver Setup and Operation

Connecting Receivers to Components

Guidance on connecting servos and ESC to the appropriate receiver terminals.

Adjusting Receiver Settings

GA005 Balance Charger and Battery Care

GA005 Charger Safety and Usage Warnings

Crucial safety precautions and important usage warnings for the GA005 charger.

Li-Po Battery Pack Maintenance Tips

Master CP Flight Operations Guide

Correct Power On Sequence

Essential Pre-Flight Adjustments and Checks

Key adjustments and checks that must be performed before initiating flight.

Main Rotor Blade Balancing and Tracking

Detailed steps for adjusting main rotor blades to ensure proper balance and tracking.

Walkera Master cp Specifications

General

Type	Helicopter
Brand	Walkera
Model	Master CP
Flight Time	6-8 minutes
Gyro	3-axis
Transmitter	Devo 7
Motor Type	Brushless
Skill Level	Intermediate
Charging Time	90 minutes
Control Range	300m