Need help?Do you have a question about the Wallach Surgical Devices ZOOMSCOPE COLPOSCOPE and is the answer not in the manual?
General| Working Distance | 300 mm |
|---|---|
| Light Source | LED |
| Eyepieces | 12.5x |
| Power Supply | 100-240 VAC |
| Focusing | Fine focus adjustment knob |
Instructions for assembling the mobile floorstand unit for the ZoomScope.
Guide for placing the light box and suspension arm assembly onto the column.
Steps for attaching the microscope head and securing the eyepieces.
Details on adjusting the up/down and back/forth motion tension of the microscope arm.
Instructions on repositioning the microscope head for colposcope or operating microscope use.
Guide for safely removing and inserting eyepieces into the binocular tubes.
Explanation of how final magnification is determined and available ranges.
Step-by-step guide for safely replacing the microscope's light bulb.
Instructions for locating and replacing the fuses in the light box assembly.
Steps for powering on the device and adjusting light intensity using controls.
Instructions for positioning the ZoomScope and locking its casters in place.
Adjusting diopter rings on binocular tubes for precise focus.
Conforming binocular tubes to interpupillary distance for clear viewing.
Using zoom and fine focus knobs for optimal image clarity at different magnifications.
Guide for connecting the analog camera to the microscope and control unit.
Instructions for connecting the video monitor to the camera control unit.
Initial checks for inoperative ZoomScope including power, bulb, and fuses.
Instructions for contacting the repair department and preparing equipment for return.
To Next Page