Need help?Do you have a question about the Wallbox EM340 and is the answer not in the manual?
General| Product Category | Energy Meter |
|---|---|
| Communication | Modbus RTU |
| Mounting | DIN Rail |
| Accuracy | Class 1 |
| Power Supply | 230 VAC |
| Operating Temperature | -25°C to +55°C |
| Protection Class | IP20 |
| Rated Voltage | 230/400V AC |
| Type | Three-phase Energy Meter |
| Measurement Range | 0.25 - 65 A |
| Output Signal | Pulse |
Outlines instructions for installing energy meters with Power Boost and Eco-Smart functionalities.
Connect meter before closing charger; only Wallbox meters are compatible.
Installation must be performed by qualified personnel according to local regulations.
Update charger software and ensure it is powered off before connecting the meter.
Refer to your charger's Installation Guide on Wallbox Academy for more details.
Lists items included in the box: Meter, Wiring Guide, Grommet, and Installation Manual.
Details the tools needed for installation, including screwdrivers, pliers, and cable strippers.
Illustrates meter placement after mains supply and identifies key components like Grid, Main Switch, Fuse Box.
Provides placement specifications for different meter models based on phase and current ratings.
Highlights compatibility of specific meter versions (PF.B) with Eco-Smart and Power Boost functionalities.
Guide for single-phase installation, connecting the meter, and handling the neutral cable correctly.
Visual guide showing how to connect EM112, EM340, EM330, and N1 CT meters to the Pulsar Plus.
Visual guide showing how to connect various meters (EM112, EM340, EM330, N1 CT, SPM1-100-AC, Pro MOD2/380) to Commander 2.
Visual guide illustrating meter connections for EM112, EM340, EM330, N1 CT, SPM1-100-AC, Pro MOD2/380 with Copper SB.
Step-by-step instructions for setting up the Power Boost functionality on the device.
Step-by-step instructions for setting up the Eco-Smart functionality on the device.
To Next Page
