44
10 SPECIFICATIONS
10.1 MECHANICAL
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Normal Extended
Digging Depth (2 ft. flat bottom) 6'4" 6’4” 7’8” 9’4” 9’4” 11’4”
Overall Operating Height (fully raised) 91" 92” 119” 135” 135” 152”
Reach from Swing Post 100" 100” 123” 141” 141” 164”
Loading Height (bucket at 60° rotation) 62" 62” 80” 89” 89" 104"
SAE* Dipper Boom Digging Force 1250 lbs. 1250 lbs. 2300 lbs. 3200 lbs. 3100 lbs. 2200 lbs
Boom Lift Capacity (end of dipper 3’ from ground) 250lbs 385 lbs. 925 lbs. 750 lbs. 710 lbs. 580 lbs
SAE* Bucket Digging Force 2054 lbs. 2600 lbs. 3800 lbs. 3925 lbs.
Transport Height (with boom fully retrac
ted) 64.5" 63” 79” 92”
Transport Width (with stabilizers up) 41" 40” 42½” 42½”
Ground Clearance 8½" 10½” 10½” 10½”
Transport Length 56 68” 80” 81”
Transport Weight (base unit only - no bucket or mounts) 500 lbs. 575 lbs. 800 lbs. 850 lbs.
Bucket Rotation 180° 180° 180° 180°
Swing Arc 150° 180° 180° 180°
Stabilizer Width (Spread) 72" 74” 89” 89”
Stabilizer Width (Transport) 41" 40” 42½” 42½”
Operating Pressure 1800 psi 1800 psi 2250 psi 2250 psi
Hydraulic Volume Requirements 3½-6 gpm 5-7 gpm* 5-7 gpm* 5-7 gpm*
Recommended Tractor HP 18-28 HP 18-30 HP 30-60 HP 45-100 HP
Recommended Skidsteer Requirement
s (SSQT) Mini Skidsteer Mini Skidsteer 30-60 30-100
Main Boom Cylinder Diameter 2.5 2.5 3.0 3.0
Dipper Cylinder Diameter 2.25 2.25 2.5 2.5
Bucket Cylinder Diameter 2 2.25 2.5 2.5
Swing Cylinder Diameter 2.5 (x1) 2.0 (x2) 2.5 (x2) 2.5 (x2)
Stabilizer Cylinder Diameter 2 2.0 2.5 3.0
Extender Cylinder - - - -
Flow Divider Included no no yes yes
Bucket Sizes Available 9, 12, 15
9, 12, 15, 18 9, 12, 15, 18, 24 9, 12, 15, 18, 24
3 Point Hitch n/a Cat I (PT300)
Cat I (PT300)/
Cat II (PT322)
Cat I (PT300)/
Cat II (PT322)
2.5
5-7 gpm*
3925 lbs.
92”
42½”
10½”
81”
1000 lbs.
180°
180°
89”
42½”
2250 psi
1.75
Cat II (PT322)
SPECIFICATIONS
GX920XT
GE605 GX620 GX720 GX920
yes
45-100 HP
30-100
3.0
2.5
2.5 (x2)
3.0
To Next Page
Loading...