43
Fig. 44 STOPPING
14. Stopping:
a. Lower the dipper / bucket to
the ground.
b. Place all controls in neutral.
c. If the machine will be moved
to a new location, swing the
boom into its straight posi-
tion and fully retract boom to
align lock pin brackets.
d. Install both lock pins and
their retainers
e. If the machine is being
moved to a new location,
raise the stabilizers to their
fully up position.
f. Dismount from the backhoe.
g. Mount the tractor and sit in its seat.
h. Slow the engine to idle.
i. Turn the hydraulic circuit to OFF or disen-
gage the PTO clutch.
j. Shut off engine.
15. Emergency Stopping:
In case of an emergency, lower the dipper /
bucket to the ground and stop engine. Be
sure to resolve and correct the emergency
situation before resuming work. Do not take
chances in an emergency.
To Next Page
Loading...