52
STORAGE SAFETY
• Store the unit in an area away from human
activity.
• Do not permit children to play on or around
the stored machine.
• Store the unit in a dry, level area. Support the
frame with planks if required.
4.11 STORAGE
After the season's use, the machine should be thor-
oughly inspected and prepared for storage. Repair
or replace any worn or damaged components to
prevent any unnecessary down time at the start of
the next season. To ensure a long, trouble-free life,
this procedure should be followed when preparing
the unit for storage:
1. Clear the area of bystanders, especially small
children.
2. Thoroughly wash the machine using a pres-
sure washer to remove all dirt, mud, debris and
residue.
3. Inspect the bucket, dipper and boom for
damage or entangled material. Repair or
replace damaged parts. Remove all entan-
gled material.
4. Check the oil in the optional reservoir (if so
equipped). Add as required.
5. Lubricate all grease fi ttings. Make sure all
grease cavities have been fi lled with grease
to remove any water residue from wash-
ing.
6. Touch up all paint nicks and scratches to
prevent rusting.
7. Move to storage area.
8. Select an area that is dry, level and free of
debris.
9. Place blocks or planks under the stabilizers
and bucket.
10. Unhook from tractor (See Section 4.8).
11. Stow hydraulic hoses in storage brackets to
keep them off the ground.
4.11.1 PLACING IN STORAGE
Fig. 61 STORED
12. Apply a coat of heavy grease to exposed cylin-
der rams to prevent rusting.
13. If the machine cannot be placed inside, cover
with a waterproof tarpaulin and tie securely in
place.
14. Store the machine in an area away from human
activity.
15. Do not allow children to play on or around the
stored machine.
To Next Page
Loading...