Wally MILK - Page 35

EN
35
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
• This parameter allows the technician to
change the temperature display from
degrees Celsius to degrees Fahrenheit
and vice versa.
Temperature Measurement Units
Recipe
Steaming
Manual
Steaming
Manage
Recipes
Machine
Conguration
1
After entering the password and accessing the “Technician” programming menu, rotate the Encoder Knob until
the following is displayed.
Temperature Units
CELSIUS
2
Press the Encoder Knob to access the menu, rotate the Encoder Knob to choose the desired option, press the
Encoder Knob to conrm the option.
Temperature Units
CELSIUS