Wally MILK - Technical Programming Functions

EN
43
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
Recipe
Steaming
Manual
Steaming
Manage
Recipes
Machine
Conguration
1
After entering the password and accessing the “Technician” programming menu, rotate the Encoder Knob until
the following is displayed.
Reset
Settings
2
Press the Encoder Knob to access the menu.
Reset
Settings
• This parameter allows the technician to
reset all the values returning to initial
factory settings.
• It is possible to reset the settings you
made in the “Barista” programming or
the settings you made in the “Technical”
programming.
Reset