Wally MILK - Page 44

EN
44
Display Operating Procedure
Description
Programming Mode
“Technical” Programming
Barista Settings
Reset
3
Press the Encoder Knob to reset the settings made in the “Barista” programming.
Technician
Settings Reset
4
Press the Encoder Knob to reset the settings made in the “Technician” programming.
Reset
Settings
• This parameter allows the technician to
reset all the values returning to initial
factory settings.
• It is possible to reset the settings you
made in the “Barista” programming or
the settings you made in the “Technical”
programming.
Reset