WALMEC Walcom Easy - Opening the Packing Case

4
OPENING THE PACKING CASE
The cardboard packing case includes inner wrapping with corrugated cardboard.
The packing case should only be moved by fork-lift truck and handled at all times by two people, until
installation is complete.
Carry out the following instructions:
1
. Remove the unit from the corrugated cardboard and the outside packing.
2. Remove any cardboard protecting the base and washing chamber and then remove the chamber itself (pull out first
the hose for solvent discharge then the hose for solvent fumes).
3. The EASY/S model is fitted with a base hatch containing a knob for hatch opening and closing, a screw and pin.
Remove this unit from the base.
3 2
1
4 5
6
9
8 7
13
12
11
10
14
15
16
B
A
fig. 1