WALTERSCHEID K90/4TF - User Manual

REIBKUPPLUNG K90TF UND K90/4TF
FRICTION CLUTCH K90TF UND K90/4TF
LIMITEUR À FRICTION K90TF UND K90/4TF
K90TF
K90/4TF
Walterscheid GmbH | Hauptstraße 150 | D-53797 Lohmar
Tel.: +49 2246 12-0 | Fax: +49 2246 12-3501
www.walterscheid.com
REPARATURANLEITUNG
REPAIR INSTRUCTIONS
MANUEL DE RÉPARATION
ADLS1801.2_113560

Summary

Cleaning, Servicing, and Maintenance

Setting Values

Details screw tightening and block reserve (L1) adjustment for clutch settings.

Operational Instructions

Pre-Use and Post-Stoppage Checks

Check clutch operation and release after long stoppages.

Running-In Procedure

Procedure for running-in clutches after assembly or lining renewal.

Clutch Releasing and Re-tightening

Clutch Releasing

Re-tightening Procedure

Dismantling

Initial Dismantling Steps

Assembly

Preparation and Initial Installation

Clean friction surfaces and install friction discs and hub.

Component Installation (Part 1)

Component Installation (Part 2)

Bolt and Nut Assembly

Final Tightening and Check

Final tightening of hexagon nuts and checking dimension L1.

WALTERSCHEID K90/4TF Specifications

General

Brand	WALTERSCHEID
Model	K90/4TF
Category	Industrial Equipment
Language	English