WALTHER PILOT PILOT Signier 20 360 - User Manual

37 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

WALTHER PILOT

Betriebsanleitung / Operating Instructions /

Instructions de Service / Gebruiksaanwijzing

PILOT Signier

Signierpistole / Marking Gun /

Pistolet de Marquage / Markeer Spuitpistolen

Typ / Type

20 360

REV. 10/11

DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC

PHONE: 586-210-0555

WEB: www.cetinc.com

Table of Contents

Questions and Answers

A
Ashley RiosAug 11, 2025
Why is my WALTHER PILOT Power Tool gun dripping?
- C
  Charles FitzgeraldAug 11, 2025
  If your WALTHER PILOT Power Tool gun is dripping, it could be due to a few reasons. First, the material needle or nozzle might be fouled; in this case, retool the spray gun, and try cleaning or replacing the affected parts. Another cause might be damage to the material needle or nozzle, so consider replacing them. Lastly, check if the stuffing box is too tight and loosen it slightly with a screw wrench.
G
Gabrielle RodriguezAug 18, 2025
What to do if my WALTHER PILOT PILOT Signier 20 360 Power Tool gun sprays when not in operation?
- X
  xthompsonAug 19, 2025
  If the WALTHER PILOT Power Tool gun sprays when not in operation, the cup seals may be damaged. Replace the cup seals to resolve this issue.
M
mcguiremitchellAug 27, 2025
Why WALTHER PILOT PILOT Signier 20 360 Power Tool gun fails to open?
- F
  Frances HillAug 27, 2025
  If your WALTHER PILOT Power Tool gun fails to open, the control air pressure might be too low. Increase the control air pressure to at least 4 bar.
C
charlesmendezSep 2, 2025
How to fix pulsating spray jet on WALTHER PILOT PILOT Signier 20 360?
- V
  Victoria WilliamsSep 2, 2025
  If the spray jet of your WALTHER PILOT Power Tool is pulsating or unsteady, it's possible that the level in the material tank is too low. Top-up the material level.

WALTHER PILOT PILOT Signier 20 360 Specifications

General

Brand	WALTHER PILOT
Model	PILOT Signier 20 360
Category	Power Tool
Language	English