WALTHERS
®
CONTROL SYSTEM
Switch Machine Reference Guide - Part 1 - Overview
942-101 Switch Machine ©2018 Wm. K. Walthers Inc., Milwaukee WI 53218
942 - 101
3
Switch Machines and Accessories
942-101 Switch Machine
Fully assembled servo driven slow motion
Includes integrated DCC accessory decoder
Includes two auxiliary 5A rated switches
942-110 12V 2A Filtered DC Power Supply
Powers up to 16 switch machines
Plugs into 942-111 Power Distribution Block
942-111 Power Distribution Block
Matching connector for 942-110 Power Supply
Includes 2 Extension Cables
Terminal block for alternate external power in/out
942-112 Connecting Cable, 48”(1.2 m) pkg (5)
Fully assembled with servo type connectors
Socket to Socket for connecting extra switches,
and external devices to switch machine.
942-113 Extension Cable, 48”(1.2 m) pkg (5)
Fully assembled with servo type connectors
Socket to plug used to extend connections to
controllers or power distribution block
942-121 Turnout Controller
Single pushbutton and dual bi-color LEDs
Includes drilling template, connecting cable,
and spacer adapters for 1/8” or 1/4” panels
942-122 Crossover Controller
Dual pushbuttons and bi-color LED indicators
Includes drilling template, connecting cables,
and spacer adapters for 1/8” or 1/4” panels
942-123 Accessory Controller
Single pushbutton and bi-color LED indicator
Includes drilling template, connecting cable,
and spacer adapters for 1/8” or 1/4” panels
942-140 Drill Set
Includes 3/16”, #43, and #57 drill bits
Includes step drill matching pushbutton and
indicator bezels
Walthers Controls offers components for your layout that are high quality, ready to use, and feature
plug-in installation. Our products incorporate the latest technology so you can spend less time under
your layout, and more time running your trains.
Walthers Control System switch machines and related products bring you a low-cost solution for easy
turnout control for HO, N, Z, S, and O Scale layouts. The system is expandable at any time to grow
with your layout, and can be used on layouts using both DCC- or DC-power. The system components
use servo-style wiring with assembled connectors for plug-and-play easy installation. No soldering is
required. Two styles of cables are available separately to expand your wiring as needed. User-
friendly instructions are included with all items, and drilling templates for easy mounting on your layout
or fascia are included as appropriate. The Reference Guides are an overall reference for the installa-
tion and operation of each of the components shown below.
For additional information on new products and updates refer to the link below:
walthers.com/products/walthers-control-system
To Next Page
Need help?
General
