WAM R03 Series User Manual

04.12
VAL.120.--.M.4L
2
-
-
-
-
VCP
Series R03
DECLARATION OF CONFORMITY
KONFORMITÄTSERKLÄRUNG
DECLARATION DE CONFORMITE
DICHIARAZIONE DI CONFORMITA’
WAMGROUP S.p.A. - Strada degli Schiocchi, 12 - I-41100 Modena (Mo) - Italy
and, where applicable, the requirements imposed by the following EC Directives
Directive 2004/108/EC of the European Parliament and the Council of 15 December 2004 on the approximation of the laws
of the Member States relating to electromagnetic compatibility.
Directive 2006/95/EC of the European Parliament and the Council of 12 December 2006 on the approximation of the laws
of the Member States relating to electrical equipment designed for use within certain voltage limits
.
The relevant technical documentation is compiled in accordance with Annex VII B
of the Machinery Directive 2006/42/EC
Harmonized standards, national standards and technical regulations in question:
ENISO12100-1:2005ENISO12100-2:2005
The signing company is committed to provide, in response to a reasoned request by national authorities, relevant informa-
tion on products covered by this declaration, without prejudice to the rights of intellectual property of the manufacturer. The
information will be transmitted directly to the national authorities having requested.
It’s forbidden to operate all these products before the machine, in which they will be installed, is declared in con-
formity with 2006/42/EEC AND SUBSEQUENT AMENDMENTS
StradadegliSchiocchi,12-I-41100Modena(Mo)-Italy,01.01.2010
The person authorized to provide
the technical documentation:
Vainer Marchesini
The legal representative:
Vainer Marchesini
1.1.1.-Denitions
1.1.2.-Principlesofsafetyintegration
1.1.3.-Materialsandproducts
1.1.5.-Designofmachinerytofacilitateitshandling
1.3.1.-Riskoflossofstability
1.3.2.-Riskofbreak-upduringoperation
1.3.3.-Risksduetofallingorejectedobjects
1.3.4.-Risksduetosurfaces,edgesorangles
1.3.7.-Risksrelatedtomovingparts
1.3.8.-Choiceofprotectionagainstrisksarisingfrommovingparts
1.3.9.-Risksofuncontrolledmovements
1.5.4.-Errorsoftting
1.5.5.-Extremetemperatures
1.5.6.-Fire
1.5.7.-Explosion
1.5.8.-Noise
1.5.9.-Vibrations
1.5.13.-Emissionsofhazardousmaterialsandsubstances
1.5.15.-Riskofslipping,trippingorfalling
1.6.1.-Machinerymaintenance
1.6.2.-Accesstooperatingpositionsandservicingpoints
1.6.4.-Operatorintervention
1.6.5.-Cleaningofinternalparts
1.7.1.-Informationandwarningsonthemachinery
1.7.2.-Warningofresidualrisks
1.7.4.-Instructions
The manufacturer:
WAMGROUP S.p.A.
located in
Strada degli Schiocchi, 12 - I-41100 Modena (Mo) - Italy
under its own responsibility declares that:
VCPSeriesR03
Declaration Of Incorporation Of Partly Completed Machinery Annex II B 2006/42/CE Directive
comply with the RES Directive 2006/42/EC
oftheEuropeanParliamentandtheCouncilof17May2006onmachinery
36

WAM R03 Series Specifications

General

Brand	WAM
Model	R03 Series
Category	Control Unit
Language	English