WamBam BL19101 User Manual

WWW.WAMBAMFENCE.COM
1
ASSEMBLY INSTRUCTIONS
BL19101
BL19101
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NANTUCKET
VINYL PICKET FENCE
WITH POST AND

ANCHOR KIT

WWW.WAMBAMFENCE.COM
VER. 111220

WamBam BL19101 Specifications

General

Brand	WamBam
Model	BL19101
Category	Fencing & Gates
Language	English

Summary

Assembly Tips and Guidance

Planning and Workspace

Installation Techniques

Advice on driving pipe anchors and using string lines for alignment.

Avoid These Pitfalls

Contact Local Utilities

Crucial step to call local utilities before digging to avoid hazards.

Regulatory Compliance

Step 2: Install Pipe Anchors and Posts

Step 2.1: Drive First Anchor

Guidance on driving the initial pipe anchor into the ground.

Step 2.2: Drive Second Anchor

Step 2.5: Slide Posts

Step 3: Install Rails

Step 3.1: Attach Bottom Brackets

Installing brackets for the bottom rail onto the posts.

Step 3.2: Connect Bottom Rail

Step 3.3: Align Opposing Brackets

Using a level to determine and mark the height for the opposing bracket.

Step 3.4: Secure Bottom Brackets

Step 3.5: Attach Top Brackets

Step 3.6: Connect Top and Bottom Rails

Securing both the top and bottom rails into their respective brackets.

Step 4: Install Pickets and Post Caps

Step 4.1: Insert Pickets

Inserting the fence pickets through the top and bottom rails.

Step 4.2: Attach Post Caps