6
Installation and Adjustment
Device Power-On and Power-Off
Power-On
Method 1: Press the power button on the projector to start.
Method 2: Point the remote control to the projector and press the power key to turn it
on.
Shut Down
Short press the power button or the " " key on the remote control, once shutdown
prompt box appears, short press the power button or the power key on the remote
control again.
Adjusts Focal Length
Focus Length: When the picture image is blurred (indicated as the right picture), adjust
the lens focus through " " " " on the remote control to achieve the best definition.
To Next Page
Loading...
