Important Safety Precautions
You are recommended to use the projector in a dark room to achieve
the best effect.
1. Please don’t install in places that directly blown by cold and warm air of air-conditioning,
water condensation or high temperature may lead to failure to the machine.
2. Ensure adequate ventilation and vent are not blocked to prevent heat accumulation
inside the machine.
3. Please prevent foreign matters such as nails or paper scraps from falling into the
machine. Do not insert any metals such as iron wire or screwdriver into the machine.
Please turn off the power immediately and turn to professional technician to remove
it if any foreign matters fall into the body.
4. Do not place any liquid on this machine to avoid risk of electric leakage.
5. Please use soft packaging materials to move the projector, install lens protection cover
to protect the lens from scraping, in addition, keep the projector from violent vibration.
6. Areas near the exhaust will become hot during and after we use the projector, it may
lead to scald if we touch with hand.
7. Please don’t watch lens directly when it’s on so as to protect our eyes from damage.
Note:
· Don’t open the shell to prevent electric shock, Please turn to qualified professional
maintenance personnel for the maintenance as there are no parts in the machine that
users can repair themselves.
· Don’t expose the machine to rain or moisture so as to prevent misfire or electric shock.
To Next Page
Loading...
