EasyManua.ls Logo

W&H Assistina Twin MB-302 User Manual

W&H Assistina Twin MB-302
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions for Use
MB-302
Question and Answer IconNeed help?

Do you have a question about the W&H Assistina Twin MB-302 and is the answer not in the manual?

W&H Assistina Twin MB-302 Specifications

General IconGeneral
BrandW&H
ModelAssistina Twin MB-302
CategoryDental equipment
LanguageEnglish

Summary

Introduction

Safety Notes and Precautions

General Operational and Environmental Safety

Key safety instructions for setup, operation, and handling of the device and its power supply.

Process Fluid and Cartridge Safety

Guidelines for safe handling of process fluids, cartridges, and warnings about sharp components.

Device Start-up and Initial Setup

Cartridge Installation and Removal

Step-by-step instructions for inserting and removing cartridges, including safety precautions.

Initial Filling Process

Detailed steps for the initial filling of the device's chambers with fluids.

Device Operation

General Operating Safety

Essential safety measures and precautions to be followed during the operation of the device.

Instrument Handling (ISO Connection)

Instructions for loading and removing dental instruments connected via the ISO standard.

Instrument Removal (ISO) and Loading/Removal (RM)

Procedure for removing ISO instruments and loading/removing RM instruments with adaptors.

Instrument Loading/Removal (Fixed RM)

Step-by-step guide for loading and removing instruments with fixed RM connections using adaptors.

Maintenance Process Steps

Details on performing the automatic maintenance process, including preparation and execution.

Chucking System Lubrication

Step-by-step guide for lubricating the chucking system, covering the entire process.

Cleaning and Disinfection

General Cleaning Guidelines

Recommendations for cleaning and disinfection, including required protective measures and agents.

Maintenance Procedures

O-ring Replacement

Detailed steps for safely removing and installing new O-rings on the device.

Troubleshooting Error Messages

Standby, Power, Electronics & Window Errors

Troubleshooting for errors related to standby mode, power connection, electronics, and open sliding window.

Servicing

Technical Data and Specifications

Explanation of warranty terms

Related product manuals