EasyManua.ls Logo

W&H OsseoSet 200 User Manual

W&H OsseoSet 200
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions for use
SI-923 / SI-915
Question and Answer IconNeed help?

Do you have a question about the W&H OsseoSet 200 and is the answer not in the manual?

W&H OsseoSet 200 Specifications

General IconGeneral
BrandW&H
ModelOsseoSet 200
CategoryIrrigation System
LanguageEnglish

Summary

1. Introduction

Intended use

Defines the specific applications and purpose of the OsseoSet™ 200 unit.

Qualifications of the user

Specifies the required training and expertise for operating the OsseoSet™ 200.

Production according to EU Directive

Details the manufacturing compliance with relevant EU directives for medical products.

Responsibility of the manufacturer

Outlines the manufacturer's liability conditions and user responsibilities.

2. Unpacking

3. Equipment supplied

4. Safety notes

Use only suitable and serviceable tools

Safety precautions regarding the use of suitable tools and proper operation of the device.

Inappropriate use

Warning against improper usage, installation, modification, or non-compliance with instructions.

Cardiac pacemaker function

Information on potential interactions with cardiac pacemakers and device operation limits.

Danger zones M and G

Safety guidelines related to hazardous environments and specific operational zones.

Control unit

Specific safety advice and classification for the control unit.

Motor and foot control

Safety approval and usage notes for the motor and foot control components.

Mains cable

Instruction to connect the mains cable only to an earthed socket outlet.

Power failure

Information on how power failures affect saved settings and reactivation.

System failure

Statement that a total system failure does not constitute a critical fault.

Intermittent operating mode S3 (4min/10min)

Details on the device's intermittent operating mode, load times, and pause times.

Coolant

Guidelines for using appropriate coolant and where to obtain it.

Rotational energy

Precautions regarding stored rotational energy and safe adjustment of screws.

5. Description of front panel

6. Description of rear panel

7. Description of motor with cable

Test run

Procedure and checks for performing an initial test run of the motor.

8. Foot control handle fitting and removal

Foot control disassembly

Foot control reassembly

Foot control pedal description

Changing programs via foot control

How to select different operating programs using the foot control pedal.

Pump control via foot control

Instructions for operating the coolant pump using the foot control pedal.

Motor direction control

How to switch the motor between forward and reverse operation using the foot control.

Foot control: VARIABLE to ON/OFF setting

9. General starting operation

10. Resetting factory settings

Factory settings overview (P1-P5)

11. Control unit program selection

Control unit speed adjustment (P1-P3)

Control unit torque adjustment (P4-P5)

Control unit coolant flow adjustment

12. Error messages and remedies

13. Disinfection, Cleaning, Sterilization

Control unit, foot control, handle procedures

Procedures for cleaning and disinfecting the control unit, foot control, and handle.

Motor and cable disinfection and cleaning

Manual disinfection and cleaning guidelines for the motor and cable components.

Sterilization and storage guidelines

Recommended methods for sterilizing the unit and storing it safely.

14. Accessories

15. Servicing and checking

Regular unit and accessory inspection

Procedures for regular inspection and safety checks of the unit and accessories.

Motor and cable servicing intervals

Recommended servicing intervals and durability standards for the motor and cable.

Repairs and product returns

Guidelines for handling repairs and returning equipment to service centers.

16. Technical data

Physical operating conditions

Environmental specifications for temperature and humidity during operation and storage.

Equipment and packaging disposal

Instructions for the proper recycling and disposal of the OsseoSet™ 200 and its packaging.

Letter of indemnity and warranty

User training certification

Authorized W&H Service organizations